Wood containing more than 25 percent moisture is considered green and should never be burned in an indoor fireplace or wood stove. … Since your trees are already dead, the curing process will have already started, and the wood should be dry enough to burn in a shorter time period.
Is burning dry wood bad?
These emissions can contribute to poor local air quality. It’s therefore always recommended to only burn properly seasoned or kiln dried firewood, where the moisture content of the wood is at an acceptable level that will lead to a clean burn of the wood with significantly reduced harmful emissions.
Can you burn dead wood in a fire pit?
The EPA also states that you should never burn “wet, rotted, diseased, or moldy wood” in your fireplace or fire pit. It is generally recommended to avoid soft woods, such as pine or cedar, which tend to burn fast with excessive smoke.
Can firewood be too dry?
Yes, although it is not a common problem. Properly seasoned firewood still has a fair amount of water in it, say 15 to 20 percent of its weight.
Can I burn fresh cut wood?
No matter which way you cut it (or split it with your trusty log splitter), fresh wood just doesn’t burn right. Fresh-cut wood has a high moisture content, which makes it hard to get burning. … Worse yet, unseasoned wood is a major contributor to creosote buildup in chimneys, which leads to chimney fires.
What can you burn instead of wood?
Fortunately, there are eco-friendlier wood alternatives to try to see which one best suits your outdoor entertaining style and works best for you.
- Wood Bricks: …
- Wood Pellets: …
- Soy and Switchgrass Logs: …
- Recycled Coffee Grounds: …
- Non-Petroleum Natural Wax Logs:
Why does my firewood burn so fast?
The main reasons why a fire would continue to burn so fast in your fireplace can be that: The wood is too dry; Softwood logs are being burnt, or; There is too much air supply to the fire.
Why wont my logs burn?
If your logs won’t catch fire, it may be that you have started too big. Light some kindling wood or paper first, and wait for it to catch fire to some small logs or pieces of coal. … If you overload your wood burner with logs, the lack of air circulation can also cause your fire to go out.