What is the important thing that you should consider before using a fire extinguisher?
Before operating the fire extinguisher, make sure you have a clear evacuation path. If you cannot put out the fire, you’ll need to make a safe exit.
What are the three things you need to consider before using a fire extinguisher?
Modern fire extinguishers can be operated successfully by following the acronym PASS. This represents Pull, Aim, Squeeze and Sweep. Pull the extinguishers’ safety pin, hold it away from you and release the locking mechanism. Aim low and target the source of the flame rather than the flame itself.
What are the 2 things to checked before using a fire extinguisher?
Examine the extinguisher for obvious physical damage, corrosion, leakage, or clogged nozzle. Confirm the pressure gauge or indicator is in the operable range or position, and lift the extinguisher to ensure it is still full. Make sure the operating instructions on the nameplate are legible and facing outward.
How do you use fire extinguishers what are the things we need to consider or remember in using fire extinguisher?
When operating a fire extinguisher, tell residents to remember the word PASS:
- Pull the pin. Hold the extinguisher with the nozzle pointing away from you and release the locking mechanism.
- Aim low. Point the extinguisher at the base of the fire.
- Squeeze the lever slowly and evenly.
- Sweep the nozzle from side-to-side.
What are the 4 types of fire extinguishers?
There are four classes of fire extinguishers – A, B, C and D – and each class can put out a different type of fire. Multipurpose extinguishers can be used on different types of fires and will be labeled with more than one class, like A-B, B-C or A-B-C.
When should you use fire extinguishers?
You should only consider using a fire extinguisher if all members of your home have been alerted to the fire and the fire department has been called. Also, make sure you are safe from smoke and that the fire is not between you and your only escape route.
What are the 4 steps for using a fire extinguisher?
The acronym PASS is used to describe these four basic steps.
- Pull (Pin) Pull pin at the top of the extinguisher, breaking the seal. …
- Aim. Approach the fire standing at a safe distance. …
- Squeeze. Squeeze the handles together to discharge the extinguishing agent inside. …
What is the first thing to do in a fire?
Activate the first fire alarm you see and try to help others to evacuate the building. Close doors behind you to help prevent the fire from spreading. Follow the evacuation procedure if you’re at your workplace or follow the escape route signs if you’re a visitor. Listen to instructions given by the Fire Marshal.
How do you know if a fire extinguisher is full?
Most fire extinguishers should have a pressure gauge with a red section and a green section. If the needle is in the green, you’re good. If your extinguishers don’t have a pressure gauge and you want to test them, press in the pin. If it pops back up, the extinguisher is pressurized.