Question: Which procedure is first when using a fire extinguisher?

Discharge the extinguisher within its effective range using the P.A.S.S. technique (pull, aim, squeeze, sweep). Back away from an extinguished fire in case it flames up again. Evacuate immediately if the extinguisher is empty and the fire is not out.

How do you use a fire extinguisher step by step?

The acronym PASS is used to describe these four basic steps.

  1. Pull (Pin) Pull pin at the top of the extinguisher, breaking the seal. …
  2. Aim. Approach the fire standing at a safe distance. …
  3. Squeeze. Squeeze the handles together to discharge the extinguishing agent inside. …
  4. Sweep.

What is the first step in using a fire extinguisher?

A: Aim the extinguisher nozzle on the hose low, toward the base of the fire. S: Squeeze the handle or lever to discharge the extinguisher. S: Sweep the nozzle back and forth. Keep the fire extinguisher aimed at the base of the fire and move it from side to side until the flames are extinguished.

What is the correct order to use a fire extinguisher?

Aim: Aim low, pointing the nozzle or hose at the base of the fire. Do not touch the horn on a CO2 extinguisher, it gets very cold and can damage the skin. Squeeze: Squeeze the handle to release the extinguishing agent. Sweep: Sweep from side to side at the base of the fire, the fuel source, until the fire is out.

IMPORTANT:  Your question: Do wood pellets burn?

Which is extinguishing method for first aid fire extinguishers?

Sodium bicarbonate, regular or ordinary used on class B and C fires, was the first of the dry chemical agents developed. In the heat of a fire, it releases a cloud of carbon dioxide that smothers the fire. That is, the gas drives oxygen away from the fire, thus stopping the chemical reaction.

What are the 2 things to checked before using a fire extinguisher?

Examine the extinguisher for obvious physical damage, corrosion, leakage, or clogged nozzle. Confirm the pressure gauge or indicator is in the operable range or position, and lift the extinguisher to ensure it is still full. Make sure the operating instructions on the nameplate are legible and facing outward.

Which part of fire extinguisher should Amit pull first to unlock it?

Knowing how to use a fire extinguisher could save your life in an emergency. The key to putting out a fire with an extinguisher is to use the PASS strategy: Pull the pin, Aim the hose, Squeeze the lever, and Sweep the hose.

Should you have fire extinguisher at home?

Fire extinguishers should be kept on every level of your home, as well as in the kitchen and garage. If a fire starts in your home, first and foremost, evacuate and call the fire department to report the fire. Once these two conditions have been met, you can use the fire extinguisher to try and put out the fire.

What are the 4 types of fire extinguishers?

There are four classes of fire extinguishers – A, B, C and D – and each class can put out a different type of fire. Multipurpose extinguishers can be used on different types of fires and will be labeled with more than one class, like A-B, B-C or A-B-C.

IMPORTANT:  You asked: How do you extinguish a wildfire?

What is the fire race procedure?

RACE: Remove, Alarm, Confine and Extinguish or Evacuate

This easy to remember acronym is our University procedure in the case of a fire. Particularly in the hospital, every staff member is trained to recognize and respond appropriately in the case of a fire using this term.

Do fire extinguishers expire?

Even if there’s no expiration date, it won’t last forever. Manufacturers say most extinguishers should work for 5 to 15 years, but you might not know if you got yours three years ago or 13. … If it falls anywhere else, the extinguisher is unreliable and should be serviced or replaced.

Fire safety