What to do if your in an elevator and the fire alarm goes off?

What happens if you are in an elevator and the fire alarm goes off?

The fire service mode can be automatically activated whenever smoke is detected in the building. … When the fire service mode is activated, the elevator cab is designed to return to the ground floor. If smoke is detected on the ground floor, the elevator is designed to return the cab to an alternate floor.

What happens if you’re in an elevator during a fire?

Once the fire begins to spread, the smoke can easily flood the elevator shaft. This will suffocate anyone in the elevator at the time, and so is extremely dangerous. The movement of the elevator will act as a billows in the building, pushing air around and making it even easier for the fire to spread.

Can an elevator catch fire?

An elevator shaft acts like a chimney and can fill up with smoke quickly, putting you at risk of smoke inhalation. If you become trapped in an elevator during a fire emergency, firefighters will understandably need to prioritize rescuing you over putting out the fire.

IMPORTANT:  What is a Class A fire extinguisher good for?

Why shouldn’t you use lifts in a fire?

Dangers of Using Lifts in a Fire

But during the later stages of a fire, this can get flipped on its head. … Fire damage to the lifts electrical supply can cause it to stop abruptly between floors – and if fire has breached the elevator shaft, anyone trapped in the lift is in danger of massive heat and smoke exposure.

When should you use the lift in the event of a fire?

Exclusive use of a passenger lift by the fire service to carry firefighters and their equipment to the required floors in the event of a fire. Fire fighting lifts are required in housing where the building has a floor more than 18m above or more than 10m below fire service vehicle access level.

Is a smoke detector required in an elevator shaft?

NFPA 13-8.15. 5.1 and 8.15. 5.5. Smoke detectors are always required at elevator lobbies and machine/control rooms for the purpose of elevator recall.

How do you silence an elevator alarm?

Silencing the Alarm. Locate the silence switch or button inside the panel or on the keypad. Press the silence button or activate the switch.

How do you reset an elevator in your home?

To reset and return the elevator to normal operation, make sure no one is in the elevator hoistway and all landing doors are tightly closed. Then, turn off the elevator’s main house power breaker (EXCEPT IN FLORIDA — SEE FLORIDA STEP BELOW).

How do you fix a stuck elevator?

Do These 7 Things When Stuck in an Elevator

  1. Stay calm. Try to keep a clear head so you don’t jeopardize your safety. …
  2. Find a light source. …
  3. Press the “door open” button. …
  4. Press the call button. …
  5. Press the alarm button. …
  6. Yell for help. …
  7. Wait it out.
IMPORTANT:  Do fire alarms hurt cats ears?
Fire safety