Mostly, this is to facilitate tight turns which can’t be negotiated with a normal fire truck with a fixed rear axle. Keen eyes will notice that as the front of the truck moves over to the rightmost lane, the rear tiller steers in the opposite direction and deftly steers his part of the truck to the leftmost lane.
Are fire trucks driven by two people?
The only driver is in the front. “They’re more common for us today because they tend to be shorter — as much as 15 feet shorter,” Mr. Long said.
Why do some fire trucks have two steering wheels?
It has two different steering wheels for the front and back tires. This allows the drivers to take sharper corners and navigate tight city streets.
What is a tillerman firefighter?
(tillermen) (US) A person who steers the rear wheels of a fire truck or controls its ladder. *2003 Tom Zambrano – Warriors of Fire. *:That function was reserved for the tillerman , (the man that sits at the top steering position at the rear of the aerial ladder).
Does every firefighter drive the truck?
Not all firefighters have to drive the fire truck. The driver engineer or driver operator is mainly responsible for driving, pumping, and maintaining the fire truck or engine. Other firefighters may drive sometimes as an “Acting Driver” when staffing requires it.
Why do they call fire trucks engines?
Generically, a “truck” could be almost any vehicle used by the fire department, but the term has become specialized over the years. Originally, “engine” referred exclusively to “pump”, the important tool for getting water to a fire. Today, “fire engines” are those vehicles of the fire department that pump water.
How long are fire truck ladders?
Fire trucks also have a gigantic ladder called an aerial. That is why they are also called Ladder Trucks. The aerial ladder reaches 100 feet in the air! That is high enough to see over very tall trees and to reach up very tall buildings.
How many miles per gallon does a fire truck get?
Gas powered rigs get about 4 to 12 miles per gallon, and diesel powered rigs get about . 5 to 8 miles per gallon. It may seem rather pathetic, but it’s not, considering all the extra work that fire engines do (pump water, idle, etc.)