Why is my gas fire pit not lighting?

When the pilot won’t light, you can often trace the problem to a lack of propane, either because the tank is empty or a valve is closed. If the pilot won’t stay lit, the problem is usually related to the thermocouple, a heat-sensitive electrode that signals the gas valve to stay open when the pilot is on.

What does a thermocouple do in a gas fire pit?

Thermocouple. Some fire pits have a thermocouple which senses the heat from the pilot light flame. That signals the gas valve to stay open when the pilot is on. Tighten all connections at the thermocouple and gas valve.

Why is my fire pit not working?

Narrowing down the possible issues that might be contributing to the failure of your firepit can range from an incomplete installation, an insufficient fuel supply, loose lines or fittings, strong breezes, or even mishandling or neglecting to maintain your fire feature.

How do you bypass the thermocouple on a gas fire pit?

To bypass the thermocouple:

  1. Move the tilts switch wire aside.
  2. Remove your thermocouple from the heater using an 8mm wrench.
  3. Pull the valve housing aside using your 13mm socket wrench. …
  4. Remove the valve using your pliers. …
  5. Put your thermocouple back into position.
IMPORTANT:  When using a fire extinguisher Remember pass which stands for quizlet?

How do you adjust the flame on a gas fire pit?

Most gas fire pits have a control knob that is clearly marked for increasing of decreasing the intensity of the flame. If the knob is not marked, a general rule of thumb is that turning the knob clockwise will increase the intensity, and counter-clockwise will decrease it.

Why will my propane fire pit not stay lit?

When the pilot won’t light, you can often trace the problem to a lack of propane, either because the tank is empty or a valve is closed. If the pilot won’t stay lit, the problem is usually related to the thermocouple, a heat-sensitive electrode that signals the gas valve to stay open when the pilot is on.

Why does my propane fire pit keep going out?

If you get dust in the pilot assembly and the pilot needs to be cleaned out, it produces a “lazy” flame, which will be disturbed by the draught of the main burners. The flame lifts away from the thermocouple and causes the temperature on the tip of the thermocouple to drop. This, in turn, makes the gas valve shut off.

How do you clean a propane fire pit?

Wipe It Down



Prepare warm, soapy water and use a damp cloth to wipe down the fire pit. Focus on cleaning the burner and the edge of the fire pit, which is likely utilized as a tabletop or footrest. It is important to keep the burner clean so that the fuel can flow through it without difficulty.

IMPORTANT:  How many firefighters are there in Seattle?

Can I light a gas fire pit with a lighter?

The match light ignition of a fire pit is manual. … To ignite the fire, you would use a long-stem lighter or a long match near the burner. Adjusting the gas valve will allow you to also adjust the size of the flames. To extinguish the flames, simply turn off the gas valve.

Where is the pilot light on a fire pit?

A gas fire pit doesn’t have a pilot light. It needs to be lit from scratch each time. Some models have a piezoelectric spark generator, but if yours doesn’t, you’ll want a wand lighter or a match.

Fire safety