OSHA requires all fire extinguishers installed in a facility to be examined at specific time intervals for safety and operability. Moreover, all fire extinguishers must have a tag affixed to them to show maintenance date and details of the person performing the service.
Do fire extinguishers need to be tagged?
The primary federal requirements for fire extinguisher inspections are specified by the National Fire Protection Agency in NFPA 10: Standard for Portable Fire Extinguishers. … All inspections must be recorded on one or more tags on the fire extinguisher; it is advisable to keep a separate inspection log as well.
Do all fire extinguishers come with tags?
For example, a dry chemical, stored pressure fire extinguisher must have an internal examination every 6 years, see NFPA 10 Table 7.3. 3.1 for more details on other types of fire extinguishers. Each fire extinguisher shall have a tag or label securely attached that indicates that maintenance was performed.
How often are fire extinguishers required to be tested and tagged?
According to OSHA [29 CFR 1910.157(e)(2), employers must perform a visual inspection on portable fire extinguishers at least once per month. This is also a good benchmark for homeowners to follow.
Can I service my own fire extinguishers?
Whilst technically, anyone who’s knowledgeable enough can carry out a fire extinguisher inspection and service, it is the advice of the recognised trade bodies, British Standards and Red Box Fire Control that you seek a third party accredited technician who can do the work safely for you.
What is one disadvantage of a fire extinguisher?
Disadvantages: limited to class A fires only. leaves a small amount of residue after the fire has been extinguished. water is an electrical conductor, making the extinguisher unsuitable if the class of fire has an electrical supply, or for use near live electrical equipment.
Where should fire extinguishers be located?
Extinguishers should be placed where they are readily accessible in the event of a fire, which typically includes normal paths of travel.
What is the first step in putting out an electrical fire?
If an electrical fire starts
- Cut off the electricity. If the device that is causing the electrical fire is found, and you can reach the cord and outlet safely, unplug it.
- Add sodium bicarbonate. …
- Remove the oxygen source. …
- Don’t use water to put it out. …
- Check your fire extinguisher.
How much clearance is required around a fire extinguisher?
Most authorities having jurisdiction (AHJ) will expect at least 36-inches clearance in front of the extinguisher as long as it is still visible. They “borrow” this 36-inch clearance measurement from NFPA 70-2011, Article 110.26 for electrical control panels.