A basic rule of thumb for fireside seating is to include at least seven feet of space around the edge of a fire pit. This provides ample room for the furniture itself, as well as for guest movement around the benches.
How far should seating be from a fire table?
Again, 18-24” is a good rule of thumb for distance between the fire pit and seating but can be personalized as your patio or terrace allows.
How high should branches be above a fire pit?
Hutchins says tree limbs that hang near or over flames should be trimmed at least 12 feet up on the tree. To be safer, your arborist may recommend going as high as 20 feet above the fire pit, he says.
How deep should my fire pit be?
The most basic in ground fire pit is a hole dug into the ground. … Excavate to a depth of six to 12 inches, depending on how deep you want your fire base. Be sure to create a level base in your fire pit. Afterwards, excavate a smaller, three- to four-inch-deep circle inside the fire pit.
Is it OK to have a fire pit under a tree?
Nearby trees pose a major safety concern when building a fire pit. A fire pit should never be so close to a tree that flames or sparks could reach the leaves or branches. … As a rule, build fire pits at least 10 to 20 feet from any nearby trees or shrubs.
Does a fire pit need drainage?
You can put a 12 inch layer of gravel under the fire pit. Use a metal grate on top of the gravel to keep debris out of the gravel. This should give sufficient area for water to drain to under our fire pit. If you built a fire pit on top of a patio slab, you need to consider the drainage.
Is 50000 Btu enough for fire pit?
50,000 BTUs provide more heat than many similar gas fire pit tables with lower rated burners. The lava rocks act as insulation and can help maintain the heat at lower settings, for more efficient gas consumption. You could add fire glass for extra ambiance, which also helps reflect the heat.