How Often Do Fire Alarms Need to be Inspected? Most fire alarm systems need to be inspected on a monthly, semi-annual, or annual basis. Many local jurisdictions have adopted NFPA 72 as the requirement for inspection and testing frequency.
How often does a fire alarm system need to be tested?
In section 25.2 it states that all fire alarm systems in commercial premises need to be tested weekly to ensure that there has not been any major failure, and that the fire alarm system is in working order.
How often should fire alarms be cleaned and tested?
Thorough visual inspections and physical testing of the components of your fire alarm system must occur weekly, monthly, quarterly, semi-annually, annually, every five and 10 years, according to the NFPA Standards and your AHJ rules.
Do fire alarms have to be tested weekly?
Fire alarm testing must be carried out every week.
This will usually be carried out by your commercial premises’ designated person or the site’s ‘Responsible Person’. The problem is that many people don’t feel confident enough with their fire alarm to put the system in ‘test’ and carry out the test.
How long does a fire alarm test last?
How Long Does a Fire Alarm Inspection Take? An inspection can range from 1 hour to a few days depending on the number of devices and complexity of the fire alarm system. If you have a large facility, the inspector should give you an idea of how long it will take to complete the inspection.
Is a fire alarm zone plan a legal requirement?
BS5839-1:2013 states that zone plans are required on every system of any size, and should also be noted as a major non-compliance during routine maintenance, when they are not displayed on existing installations.
How do I test my fire alarm?
Press and hold the test button on the smoke detector. It can take a few seconds to begin, but a loud, ear-piercing siren should emanate from the smoke detector while the button is pressed. If the sound is weak or nonexistent, replace your batteries.
How do you inspect a fire alarm?
The maintenance activities for fire alarm systems can be summed up in five steps.
- Test and calibrate alarm sensors, such as flame and smoke detectors, per manufacturer specifications. …
- Simulate inputs and test the annunciators. …
- Set sensitivity. …
- Coordinate with fire department to test the input to their system.
How do I know if my smoke detector needs a new battery?
As the battery in a smoke alarm gets weak, the smoke alarm will “chirp” about once a minute to let you know that the battery needs to be replaced. Note: Only the device with a low battery will chirp. The other interconnected alarms should be silent.
How do you get a smoke alarm to stop chirping?
Resetting the Alarm
- Turn off the power to the smoke alarm at the circuit breaker.
- Remove the smoke alarm from the mounting bracket and disconnect the power.
- Remove the battery.
- Press and hold the test button for at least 15 seconds. …
- Reconnect the power and reinstall the battery.