On all types, pulling down the handle completes the circuit and locks the handle in the activated position, which sends a notification to the fire alarm control panel to trigger the alarms. Once a manual pull has been activated, it must be restored to its ready position.
What happens when a fire alarm is activated?
When the fire alarm system is activated, the following will occur: A. The bells will sound alerting building occupants of emergency conditions. … Notification of the testing will be posted by the building engineer at each building entrance and in the elevators on the day of the fire alarm test to inform occupants.
How do you respond when a fire alarm is activated?
Fire Alarm Response
- Immediately evacuate the building to the outside.
- NEVER go back to retrieve personal belongings.
- Move away from the front of the building to allow the fire fighters and their trucks to access the building.
When should you activate a fire alarm manual pull station?
In all cases of fire, activate the nearest manual pull stations (red fire alarm boxes) to warn other occupants of fires.
Can you accidentally pull a fire alarm?
What Does California Law Say? California Penal Code 148.4 makes false fire alarms against the law. It also prohibits the destruction of fire safety equipment, such as fire alarms and extinguishers. … Setting off an alarm by accident is also not a crime.
How do I make my fire alarm stop beeping?
Resetting the Alarm
- Turn off the power to the smoke alarm at the circuit breaker.
- Remove the smoke alarm from the mounting bracket and disconnect the power.
- Remove the battery.
- Press and hold the test button for at least 15 seconds. …
- Reconnect the power and reinstall the battery.
What systems operate when a fire detector is activated?
These systems generally use smoke, heat or flame detectors to detect the outbreak of fire and to alert building occupants and the fire service. … Sometimes these systems automatically close smoke and fire doors, operate flashing warning lights, stop air-conditioning systems or alert critical staff via personal pagers.
What are the 3 categories of evacuation?
In care premises, evacuations fall into three categories:
- Single-stage: If all residents are deemed independent of help, all residents can evacuate immediately with minimal assistance.
- Progressive horizontal: Occasions when most residents are dependent on staff assistance for a successful evacuation.
What should be your first response to a fire?
Anyone discovering a fire should raise the alarm immediately, regardless as to how small the outbreak is or how innocuous it appears to be.
How many pull stations are required?
The National Fire Protection Association (NFPA) 101 Life Safety Code requires at least one manual fire pull station in each building. The code states that a building should not entrust life safety to only one safeguard, and directs that additional safeguards be implemented.