Which number on an NFPA 704 label indicates the most severe hazard?

Number System: NFPA Rating and OSHA’s Classification System 0-4 0-least hazardous 4-most hazardous 1-4 1-most severe hazard 4-least severe hazard • The Hazard category numbers are NOT required to be on labels but are required on SDSs in Section 2.

What section of an NFPA 704 label indicates health hazards?

The four divisions are typically color-coded with red on top indicating flammability, blue on the left indicating level of health hazard, yellow on the right for chemical reactivity, and white containing codes for special hazards.

What is the most harmful number on the NFPA?

NFPA Rating Criteria and NFPA Labels

A number rating system of 0-4 is provided to rate each of the four hazards and is placed on a placard. 0 represents the least hazardous while 4 represent the most hazardous.

What number is the most severe on a NFPA Safety Diamond Bar?

What do the numbers and symbols on an NFPA fire diamond mean? The diamond is broken into four sections. Numbers in the three colored sections range from 0 (least severe hazard) to 4 (most severe hazard). The fourth (white) section is left blank and is used only to denote special fire fighting measures/hazards.

IMPORTANT:  How do you store a propane fire pit for winter?

What is full form of NFPA?

National Fire Protection Association (NFPA) is a United States trade association established in 1896, is to reduce the worldwide burden of fire and other hazards on the quality of life by providing and advocating consensus codes and standards, research, training, and education.

What do the numbers mean on the NFPA diamond?

The National Fire Association (NFPA) has developed a color-coded number system called NFPA 704. The system uses a color-coded diamond with four quadrants in which numbers are used in the upper three quadrants to signal the degree of health hazard (blue), flammability hazard (red), and reactivity hazard (yellow).

What information does a hazard warning label always show?

The HCS requires chemical manufacturers, importers, or distributors to ensure that each container of hazardous chemicals leaving the workplace is labeled, tagged or marked with the following information: product identifier; signal word; hazard statement(s); precautionary 1 Page 2 2 statement(s); and pictogram(s); and …

What does NFPA 704 apply to?

The NFPA 704 standard is widely used and recognized by fire and emergency responders and safety personnel for identifying the hazards of short term/acute exposure to materials under conditions of fire, spill, or similar emergencies.

How do you read a danger diamond?

The number corresponds to the level of danger a chemical poses. The lower the number, the lower the hazard. The numbers range from zero to four, with zero representing no hazard at all, and four representing an extreme hazard. Each number also has a specific meaning based on which diamond it is in.

Fire safety